Furniture can grow mold for several reasons.
Flood damage or storage in a shed with a leaky roof is likely to cause big mold problems. In this case, dealing with a mold problem is a real health hazard. If you decide to tackle the problem yourself, I advise you to wear a respirator and gloves, and to do the work outside. Definitely do the work outside, or you will spread mold spores all over your work area.
Storage in a damp basement is likely to produce a more manageable mold problem, but still plenty enough to cause allergy symptoms. In this case, some people may not be able to smell the mold, but it can still set off allergies and cause health problems, besides being unpleasant for those who can smell the mold and mildew.
There are a number of approaches, of varying cost, hassle and effectiveness. If the easy ones don't work, then make sure the frame is worth the trouble and expense of following through with the other mold removal methods.
You may be able to solve minor mold problems by putting the furniture out in the sun for several days. Be sure to bring the furniture in at night or dew and dampness will undo anything that was accomplished during the day.
To be effective, you will need to remove the cushions and sun them separately for maximum drying and sun exposure. Flip the cushions every few hours. If you can, unzip them and pull out the stuffing for even more drying.
If you are lucky and the mold is slight, this just might work. But don't count on it.
An ozone generator can be very effective in mold removal. Ozone treatment will be covered in a separate section in a future post..
This method is more trouble, but also the most effective.
Remove all the foam from the furniture. You will end up replacing it.
Wash the cushions several times in water with peroxide. You may need to replace the upholstery buttons.
If all else fails, or if the washing method is too much work (or impractical), take the furniture in to have it reupholstered.
Comments
Removing Moldy furnature
I have a big couch & wood Tables, that has a real huge mold problem, from a recent flood. How should I go about removing it from the basement? Should I call a professional to do it?
Basement Mold
I am sorry to hear about your flood - what a drag!
If you have moldy furniture in the basement, then you can assume that there is lots of other mold in the basement. So the problem isn't so much moving the furniture, as it is being in the basement, or the house for that matter.
Start by ventilating the basement. Put a fan a basement window which sucks air out of the basement to the outside. Do not blow air into the basement or you will spread mold spores throughout the house.
It would be a good idea to have powerful extraction fan installed in the basement right away to prevent the mold toxins and spores from spreading throughout the house and to clear the air in the basement a little.
Wearing a respirator designed to remove small particles is an excellent idea - you'll want a close-fitting one, rather than just a paper mask. You may also want to wear gloves if the mold is really bad.
Once you remove the moldy furniture, you will need to clean up the rest of the basement. If there is a major mold problem throughout the basement, then yes, get professional help.
If you need professional help for the rest of the basement, then might get them to remove the furniture too, but why wait? Unless they can come today, you want to get rid of as much mold from your basement as possible, as soon as possible.
Again, the main problem is the air quality in the basement not moving the furniture itself. The first thing to take care of is ventilating the basement (extract air from the basement).
I hope this helps and good luck with the mold clean-up and flood restoration.
Mold on legs of furniture
We just recently noticed that there was mold on the legs of an oversized comfy chair we have in our basement and there was mold on the carpet where the legs sit. So we cleaned the legs and carpet with bleach water and even cut a small area of the carpet to see if there was damage/mold in the padding but there wasn't. We were not aware that there was any water in our basement. FYI... Our basement is 90% finished. Did also notice some mold around the base of a desk chair in our kids play room. Can dampness in the air cause mold? Or does it come from water seeping in? We did have local flooding in our town this summer but we didn't have any major damage. Some minor leaking in our laundry room area of the basement (only part that is NOT finished).
Mold worse in finished basesments
The problem with finished basements is that they hide the mold, and actually make it worse.
High humidity is a major mold promoter, as is a lack of air circulation. This is a particularly big problem in finished basements, behind the walls where you can't see it.
What you can see is likely the tip of the iceberg.
A dehumidifier will solve part of the problem.
Post new comment